How to Install VMware? | Step by Step installation Of VMware.
Vmware workstation 12 user manual pdf free download –
Workstation Player is a desktop application that lets you create, configure, and run virtual machines. You can also use Workstation Player to download and. Workstation User’s Manual. VMware, Inc. a virtual machine file, downloading a virtual appliance from the VMTN (VMware. Technology Network) web site.
Vmware workstation 12 user manual pdf free download
Step 2. You will be redirected to the download page. Similarly, you can select any product which you want to install. Click on Download Now according to your Operating System. We have chosen Workstation 15 Pro for Windows. While downloading make sure you have a proper internet connection as the file may have a large size. Step 3. Once the download is complete, run the. Popup will appear. Step 6. In the next screen, It will ask for some additional features, it is not mandatory to check this box.
Click on Next. Step 7. On the next screen, some checkboxes are populated, Check them as per your requirement. Step 9. At this step, you can see installation taking place. The installation will take some time, wait for it to properly install.
Note: If this setting is larger than the capacity of the host machine s hard disk, a warning message appears. You can ignore this message for now, as you can move this virtual machine to a drive that can hold it at a later time. Specify the location of the virtual disk s files. Make the Virtual Disk Big Enough The virtual disk should be large enough to hold the guest operating system and all of the software that you intend to install, with room for data and growth.
You cannot change the virtual disk s maximum capacity later. You can install additional virtual disks using the Configuration Editor For example, you need about MB of actual free space on the file system containing the virtual disk to install Windows Me and popular applications such as Microsoft Office inside the virtual machine.
You can set up a single virtual disk to hold these files. Or you can split them up installing the operating system on the first virtual disk and using a second virtual disk for applications or data files.
Click Finish and the wizard sets up the files needed for your virtual machine. What s in a Virtual Machine on a Linux Host? The virtual machine typically is stored on the host computer in a set of files, all of which are in a directory set aside for that particular virtual machine. This file is stored in the directory that holds the configuration.
Before you begin configuring your virtual machine, check the following notes and make any necessary adjustments to the configuration of your host operating system.
In a terminal window, launch VMware Workstation. The serial number is saved in your license file and VMware Workstation does not ask you for it again. If this is the first time you have launched VMware Workstation, a dialog box asks if you want to rename existing virtual disks using the new. Click OK to search all local drives on the host computer and make this change. Start the Configuration Wizard. Run the Configuration Editor.
Open an existing configuration. It also allows you to select a recently used configuration from a list. The default selection is Run the Configuration Wizard.
To start the Configuration Wizard, click OK. The Configuration Wizard presents you with a series of screens that you navigate using the Next and Prev buttons at the bottom of each screen. If you select Create standard virtual machine, the wizard prompts you to specify or accept defaults for The name of the guest operating system The path to the directory for the guest operating system and a display name for the virtual machine The disk type setting Whether to install a new virtual disk, use an existing virtual disk or use a physical disk drive The size of the virtual disk Select Install VMware Guest OS Kit if you have a Guest OS Kit and want to use it to create a preconfigured virtual machine using a virtual disk.
When there is enough information for the Configuration Wizard to finish the configuration, this button becomes available. Click Finish to have the Configuration Wizard enter default values for the remaining options. This is the fastest way to configure your virtual machine. The Configuration Wizard uses this information to select appropriate default values, such as the amount of disk space needed. If the operating system you are using is not listed, select Other and enter the name of the operating system.
You can find detailed installation notes for this and other guest operating systems in Installing Guest Operating Systems on page. Select a directory and display name for the virtual machine. Each virtual machine should have its own directory. All associated files, such as the configuration file and the disk file, are placed in this directory. If others users need to access this virtual machine, you should consider placing the virtual machine files in a location that is accessible to them.
Enter a display name for the virtual machine or accept the default. In this case, the default is Windows Millennium. To use an existing virtual disk with this virtual machine, select Use an existing virtual disk. To install the guest operating system on a raw IDE disk, select Use a physical disk. Select the size of the virtual disk.
Use the default of megabytes, or 4GB or change the setting. When you specify the size of the virtual disk, that amount of disk space is not immediately occupied by the virtual disk file. The virtual disk file grows as needed when applications and files are added to it. Note: If this setting is larger than the capacity of the host machine’s hard disk, a warning message appears. If you wish, you can disable access to the CD-ROM drive later from the Devices menu when your virtual machine is running.
Enable the floppy disk drive. Select the Floppy enabled option. Some operating systems may require the use of a floppy drive during installation. Configure the networking capabilities of the virtual machine. To enable your virtual machine to use an existing Ethernet connection on your host computer, select Bridged networking.
To enable your virtual machine to use a virtual network limited to the host and the virtual machines running on the host, select Host-only networking. To enable your virtual machine to use both an existing Ethernet connection on your host computer and also a virtual network limited to the host and the virtual machines running on the host, select Bridged and host-only networking.
To give the virtual machine access to the host computer s dial-up or external network connection using the host s IP address, select NAT. For more details about VMware Workstation networking options, see Networking on page. Review and finish the configuration. This screen presents all the options you selected.
Review it for accuracy and click Done to complete the virtual machine configuration. The basic steps for a typical operating system are: 1. Power on your virtual machine click the Power On button.
Follow the instructions provided by the operating system vendor. The next section provides notes on installing a Windows Me guest operating system. The screen shots illustrate the process on a Windows host. The steps are the same on a Linux host. For information on installing other guest operating systems, see Installing Guest Operating Systems on page.
Note: Some Microsoft Windows Me OEM disks included with new computers are customized for those computers and include device drivers and other utilities specific to the system hardware. Even if you can install this Windows Me operating system on your physical computer, you may not be able to install it in a VMware Workstation virtual machine. You may need to purchase a new copy of Windows to install in a virtual machine.
Before installing the operating system, be sure that you have already created a new virtual machine and configured it using the New Virtual Machine Wizard on Windows hosts or Configuration Wizard on Linux hosts.
Installation Steps 1. Use the VMware Workstation Configuration Editor to verify the virtual machine s devices are set up as you expect before starting the installation. For example, if you would like the Windows Me Setup program to install networking services, be sure that a virtual Ethernet adapter is installed in the virtual machine s configuration.
VMware also recommends that you disable the screen saver on the host system before starting the installation process. Power on the virtual machine to start installing Windows Me. The setup program continues installing Windows Me.
Follow the Windows Me installation steps as you would for a physical computer. If you do not install VMware Tools, the graphics environment within the virtual machine is limited to VGA mode graphics x, 16 color.
With the VMware Tools SVGA driver installed, Workstation supports up to bit displays and high display resolution, with significantly faster overall graphics performance. Other tools in the package support time synchronization between host and guest, automatic grab and release of the mouse cursor, copying and pasting between guest and host, and improved mouse performance in some guest operating systems. NET Server guest operating systems.
Some steps that are automated in newer versions of Windows must be performed manually in Windows 9x and Windows NT. It cannot be configured as a generic SCSI device. Power on the virtual machine. When the guest operating system starts, prepare your virtual machine to install VMware Tools.
If you have auto-run enabled in your guest operating system the default setting for Windows operating systems , a dialog box appears after a few seconds. It asks if you want to install VMware Tools. Click Yes to launch the InstallShield wizard.
If autorun is not enabled, the dialog box does not appear automatically. If it doesn t appear, run the VMware Tools installer. This image contains all the files needed to install VMware Tools in your guest operating system.
On Windows. With Windows and Windows XP guests, you do not have to reboot before you can use the new driver. Instructions open automatically in Notepad at the end of the installation process. If the Notepad window is hidden, bring it to the front by clicking the Notepad button on the Windows taskbar. For details, see the steps that correspond to your guest operating system.
Windows NT 1. After installing VMware Tools, click Finish. The Display Properties dialog box appears. Click the Display Type button. The Display Type dialog box appears.
Click the Change button. The Change Display dialog box appears. Select VMware, Inc. Click Yes in response to the on-screen question about third-party drivers to install the driver, then click OK to confirm the drivers were installed. Click Yes to restart Windows NT and start using the new video driver.
The VMware Tools background application is launched automatically when you reboot your virtual machine. Windows Me 1. The Display Settings dialog box appears. Click the Advanced button. Click the Adapter tab. This starts the Update Device Driver Wizard. The Wizard now presents two options. Choose the second option to Specify the location of the driver.
Check the Specify a location checkbox. Click OK. Windows Me automatically locates your driver. Click Next to install the driver. If you are upgrading a virtual machine created under VMware Workstation 2. Do you wish to continue? After the driver is installed, click Finish. Click Yes to restart Windows Me and start using the new video driver.
The VMware Tools background application starts automatically when you reboot your virtual machine. The Wizard presents two options. Choose the option to Display a list of all drivers in a specific location. Select Have Disk.
The Install From Disk dialog box appears. Answer Yes to the on-screen question, then click Next to install the driver. Click Yes to restart Windows 98 and start using the new video driver.
Click the Advanced Properties button. The Advanced Display Properties dialog box appears. This brings up the Select Device dialog box. Click OK again to install the driver. Click Yes to restart Windows 95 and start using the new video driver.
VMware Tools for Linux Guests 1. After the guest operating system has started, prepare your virtual machine to install VMware Tools. The remaining steps take place inside the virtual machine. Start X and your graphical environment if they are not started yet.
In an X terminal, launch the VMware Tools background application. To shrink virtual disks, you must run VMware Tools as root su. The steps for doing so vary depending on your Linux distribution and the desktop environment you are running. Check your operating system documentation for the appropriate steps to take. For example, in a Red Hat Linux 7. Click Add. In the Startup Command field, enter vmware-toolbox. The next time you start X, VMware Tools starts automatically. Prepare your virtual machine to install VMware Tools.
An error message appears: Shared object libc. The required library was not installed. This does not happen with full installations of FreeBSD 4. To fix the problem of the missing library, complete the following steps: 1. Insert and mount the FreeBSD 4. Change directories and run the install script. Load the CD NSS 4. When the driver finishes loading you can begin installing VMware Tools. Restart the guest operating system. In the system console, type restart server Similar configuration options are available in VMware Tools for other guest operating systems.
The Devices tab allows you to enable or disable removable devices. You can also set these options from the Devices menu of the VMware Workstation application window. The Shrink tab gives you access to the controls you need if you wish to reclaim unused space in a virtual disk. Time synchronization between the virtual machine and the host operating system Note: You can synchronize the time between the guest and host operating systems only when you set the clock in the guest operating system to a time earlier than the time set in the host.
Show VMware Tools in the taskbar The following sections give you highlights of the most common tasks. For purposes of illustration, the examples in these sections use a Windows Me guest operating system. Some commands used in the illustrations will be different for other guest operating systems. Instead of using physical buttons to turn this computer on and off, you use buttons in the toolbar at the top of the VMware Workstation window.
Toolbar when virtual machine is powered off Windows host Toolbar when virtual machine is powered off Linux host Toolbar when virtual machine is powered on Windows host Toolbar when virtual machine is powered on Linux host When you suspend a virtual machine, the Power On button becomes a Resume button.
On a Linux host, the power button is labeled Power On or Power Off, depending on whether your virtual machine is running or not. On a Windows host, an alert appears at the bottom left corner of the VMware Workstation window when your virtual machine is not running the version of VMware Tools that matches your version of VMware Workstation.
You see a small icon and a note you can click to begin installing VMware Tools. This gives you a quick way to launch the VMware Tools installer.
It is especially useful immediately after you install the guest operating system in a new virtual machine. On a Linux host, a note in the bottom bar of the VMware Workstation window alerts you when your virtual machine is not running the version of VMware Tools that matches your version of VMware Workstation. Note: Your guest operating system must be completely installed and running when you install VMware Tools.
For details, see Installing VMware Tools on page Starting a Virtual Machine on a Windows Host 1. Select the name of the virtual machine you want to use in the virtual machine list at the left of the opening screen, then click Power On. If the virtual machine you want to use is not shown there, click the Open Existing Virtual Machine icon and browse to the. That virtual machine will be added to the virtual machine list so you can open it easily the next time you want to use it.
Note: By default, VMware Workstation 3. Click the Power On button to start the virtual machine. Click anywhere inside the VMware Workstation window to give the virtual machine control of your mouse and keyboard. If you need to log on, type in your name and password just as you would on a physical computer. Removing the name from the list does not affect the virtual machine s files. You can add the virtual machine to the list again at any time by opening it, as described above.
To remove a name from the list, take these steps. Right-click a name in the list once to select it. After a brief pause, right-click the name again to pop up a context menu. Choose Remove From List to remove the selected virtual machine s name. You may also choose Power On to power on the selected virtual machine or Settings to modify settings for the selected virtual machine in the Configuration Editor. If the configuration file for the virtual machine you want to use is in the recently used configurations list, select the listing, then click OK.
If not, select the Open an existing configuration radio button, then click OK. Browse to your virtual machine s directory. Select the. After you install VMware Tools in a Windows virtual machine, the VMware Tools services start automatically when you start the guest operating system. When VMware Tools is running in a Windows virtual machine, the VMware Tools icon appears in the system tray unless you disable the icon.
You can also reactivate the system tray icon. In a Linux or FreeBSD virtual machine, boot the guest operating system, start X and launch your graphical environment. With some window managers, you can place the command to start VMware Tools in a startup configuration so VMware Tools starts automatically when you start your graphical environment. Consult your window manager s documentation for details.
Using Full Screen Mode Virtual machines run faster in full screen mode. If you want your VMware Workstation virtual machine s display to fill the screen so you no longer see the borders of the VMware Workstation window click the Full Screen button on the toolbar. You can also use a keyboard shortcut press the Ctrl- Alt-Enter keys at the same time. To get out of full screen mode to show your virtual machine inside a VMware Workstation window again press the Ctrl-Alt key combination.
You can switch between virtual machines without leaving full screen mode by using a Ctrl-Alt-Fn key combination, where Fn is a function key corresponding to the virtual machine you want to see. To find out what function key to use for a particular virtual machine, check the title bar of the virtual machine while it is running in a window.
Note: VMware Workstation does not support running virtual machines in full screen mode on dual-monitor systems. Be sure you have started the virtual machine and, if necessary, logged on.
Check the Devices menu to be sure the virtual machine has access to the CD-ROM drive and, if needed, the floppy drive. Follow the instructions on screen and in the user manual for your new software.
Note: Some applications use a product activation feature that creates a key based on the virtual hardware in the virtual machine where it is installed.
Changes in the configuration of the virtual machine may require you to reactivate the software. To minimize the number of significant changes, set the final memory size for your virtual machine and install VMware Tools before you activate the software.
Note: When you try to run a few programs including the installer for the Japanese-language version of Trend Micro Virus Buster Workstation may appear to hang. For the workaround to this problem, see the troubleshooting note on the VMware Web site at Cutting, Copying and Pasting When VMware Tools is running, you can cut or copy then paste text between applications in the virtual machine and the host computer or between two virtual machines.
Use the normal hot keys or menu choices to cut, copy and paste. To turn off this feature to prevent accidental copying and pasting from one environment to another use the Settings menu. On the Input tab, clear the Enable copy and paste to and from virtual machine check box. On the cascading menu, check to see whether there is an activated icon next to Allow copy and paste to and from virtual machine. If there is, click Allow copy and paste to and from virtual machine to turn off the feature.
Sharing Files Between Guest and Host Operating Systems To share files between a host computer and a virtual machine or between two virtual machines, you use the networking features of VMware Workstation. If you know how to share files between two physical computers on a network, you already know how to share files with a virtual machine. This section describes four scenarios for sharing files between two systems, either a host computer and a virtual machine or two virtual machines, where Both systems run Windows operating systems, using Windows file sharing You are connecting from a Linux system to a Windows system, using smbmount The following scenarios assume you have set up your virtual machine using NAT networking.
Besides giving the virtual machine a direct connection to the host computer s network, NAT networking sets up a virtual network adapter on the host computer. You can use this adapter, which connects to a virtual switch identified as vmnet8, to communicate between host and virtual machine. You can also connect two or more virtual machines using vmnet8. In all cases, the user name you used to log in to the system from which you are connecting must be a user on the system to which you want to connect.
Sharing Files Between Two Windows Systems To share files between two Windows systems where one machine is a host and the other is a virtual machine, or both are virtual machines , be sure the file and printer sharing service is installed for both operating systems and the folders you want to share are marked as shared.
Then you can browse from one system to the shared folder or folders on the other system. Sharing Files by Connecting to a Windows System from a Linux System To share files on a Windows system with a Linux system by connecting to a Windows host from a Linux guest or connecting to a Windows guest from a Linux host , you can mark a folder as shared on the Windows system, then use the smbmount utility in the Linux system to mount the shared folder. You may want to set up a shell script to run these commands.
Set up the folder or folders to share on the Windows system. Create a user account on the Windows system for the Linux system user name that you are using to connect to the Windows system. Otherwise, if you know the user name and password for a user account that can access the Windows system, you can specify that account on the command line.
From your Linux system, log in as root. Add the Windows system s host name and IP address to the hosts file, if the system cannot be found by name. Mount the Windows share on your Linux system. Enter the following command all on one line. Note: If you do not want to expose this password on the command line or in a script, leave out that option and provide the password when prompted after you run the command. Now you are connected to the shared folder on the Windows system from your Linux system and can begin to share files between the two.
Sharing Files by Connecting to a Linux System from a Windows System To share files on a Linux system with a Windows system by connecting to a Linux host from a Windows guest or connecting to a Linux guest from a Windows host , you can run Samba on the Linux system and browse shared directories in the Linux file system from Network Neighborhood in the Windows system.
You need to modify Samba on the Linux host operating system so it recognizes the vmnet8 switch, otherwise you cannot access the Linux file system. You need to do this even if you installed host-only networking as Samba is installed when you install host-only networking with VMware Workstation.
On the Linux host operating system, copy the smb. Modify Samba on the Linux host system. Provide a network workgroup name. In the [global] section, define a different shared memory access key. Save this file and create a backup copy to protect these changes when you upgrade VMware Workstation.
Restart the Samba services to load the new settings. If VMware Workstation is running on the Linux host system, suspend or shut down all running virtual machines and close all VMware Workstation windows. The user ID you use to log in to the Windows guest must be in the Linux host s smbpasswd file.
If you use the same user name and password to log in to the guest as you do on the Linux host, then you are not prompted to log in when you browse the Linux host. When the system restarts, the Samba service does not appear in the list of services starting up, but it does start, unless an error appears. On the Linux guest operating system, copy the smb. Modify Samba on the Linux system to share the directory. Sharing Files Between Two Linux Systems To share files between two Linux systems where one machine is a host and the other is a virtual machine, or both are virtual machines , you can use NFS on the system to connect to and the nfsmount utility in the system from which you are making the connection.
In a VMware Workstation virtual machine, you can. The secret is in the disk modes. VMware Workstation uses disks in three different modes persistent, undoable and nonpersistent. Disks in persistent mode behave exactly like conventional disk drives on a computer.
All data written to a disk in persistent mode is written out permanently to the disk as soon as the guest operating system writes the data. When you use undoable mode, you have the option later of keeping or discarding changes you have made while the virtual machine is running.
Until you decide, the changes are saved in a redo-log file. You can also keep the changes for the next time the virtual machine runs, but still have the option of discarding all the accumulated changes at some time in the future. All changes to a disk in nonpersistent mode are discarded after the virtual machine is powered off.
You can use the Configuration Editor to change the disk mode for your virtual machine. Start the virtual machine, but don t click the Power On button yet. The Configuration Editor appears.
On a Windows host, click the name of the drive you want to change. Select the appropriate option for persistent, undoable or nonpersistent mode. Click OK to save your changes and close the Configuration Editor. Suspending and Resuming Virtual Machines You can save the current state of your virtual machine by suspending it. Then you can resume the virtual machine to pick up work quickly, right where you stopped with all documents you were working on open and all applications in the same state as they were at the time you suspended the virtual machine.
The speed of the suspend and resume operations depends on how much data has changed while the virtual machine has been running. In general, the first suspend operation takes a bit longer than later suspend operations do.
When you suspend a virtual machine, a file with a. This file contains the entire state of the virtual machine.
When you resume the virtual machine, its state is restored from the. If you have not modified the virtual machine s configuration, the. This behavior ensures that a. Note that a virtual machine you have suspended and resumed may be suspended again, creating a new.
To suspend a virtual machine: 1. If your virtual machine is running in full-screen mode, return to window mode by pressing the Ctrl-Alt key combination.
Click Suspend on the VMware Workstation toolbar. VMware Workstation on a Windows host with a suspended virtual machine VMware Workstation on a Linux host with a suspended virtual machine 3. When VMware Workstation has completed the suspend operation, you see a screen similar to one of those above, depending on your host operating system.
It is safe to exit VMware Workstation. Start VMware Workstation and choose a virtual machine you have suspended. The process is the same as that described in Starting a Virtual Machine, above.
Click Resume on the VMware Workstation toolbar. Note that any applications you were running at the time you suspended the virtual machine are running and the content is the same as it was when you suspended the virtual machine. Resuming Virtual Machines Repeatedly from the Same Point When you suspend a virtual machine in the usual way, by clicking the Suspend button on the toolbar, a file with a.
When the virtual machine is resumed, its state is restored from the. This means that, in normal operation, the. If you want to be able to resume a virtual machine in the same state repeatedly for example, in a QA testing or classroom environment then you can take advantage of repeatable resume.
Every time you resume the virtual machine, it starts from the same point at which it was suspended using the same. This feature works only with virtual disks in nonpersistent mode. Repeatable resume makes it easy to start a virtual machine again and again in the exact same state.
However you cannot suspend this virtual machine; you can only power it off. After you power it off, you can resume the virtual machine to start it up again. The virtual machine starts at the point at which it was suspended. Do not click the Reset button on the virtual machine s toolbar. Otherwise, any files you created or other changes made to the guest operating system are lost. Restarting or resetting the guest operating system does not affect the suspended state.
To return to your repeatable resume point, just power off the virtual machine, then resume it. If you want to restrict the user interface of a virtual machine using repeatable resume, see Using Repeatable Resume with a Restricted User Interface on page Enabling Repeatable Resume on a Windows Host 1.
Make sure the virtual machine is powered off. You can enable the repeatable resume feature only when the virtual machine is powered off. Open the Configuration Editor. All virtual disks associated with this virtual machine must be in nonpersistent mode before you can enable repeatable resume. In the Configuration Editor, on the Hardware tab, select the virtual disk. Under Mode, make sure the Nonpersistent radio button is selected.
Click the Options tab. If you intend to copy this virtual machine to other PCs, VMware suggests that you specify that the redo log is to be located in the same directory as the virtual machine. Click Browse to find the virtual machine s directory and select it.
Check the Enable Repeatable Resume check box. Enabling Repeatable Resume on a Linux Host 1. The virtual disks associated with this virtual machine must be in nonpersistent mode before you can enable repeatable resume. Click Misc.
The Misc panel appears. Click Choose to find the virtual machine s directory and select it. Select Repeatable resume. Issues to Consider Caution: By default, the redo-log file for a disk in nonpersistent mode is located in your system s temp directory.
If you intend to move this virtual machine to another host, VMware suggests that you place the redo log for a virtual machine using repeatable resume in a different location outlined in the steps below , as some temp directories may be small and the redo log could exceed this limit as it grows or, on Linux hosts, the temp directory may be cleared by the operating system on a regular basis, and this would remove the redo log. Caution: VMware does not recommend moving a suspended virtual machine containing disks in nonpersistent mode to another host.
However, if you want to take advantage of the repeatable resume feature in a classroom environment, for example, and do not want to set the same repeatable resume point individually on every student s machine, be very careful and keep the following warnings in mind: VMware does not support the use of repeatable resume with a virtual machine when its disks are located on a networked drive.